Customization: | Available |
---|---|
Excitation Mode: | Excited |
Power Rating: | 500-4000W |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Axial piston fixed motor, A2FM series6x
All-purpose high pressure motor;
Size 5 … 1000,
Maximum pressure up 450 bar;
The axial piston unit is designed to be used in open and closed circuits.
Axial piston fixed motor, A2FM series70
Compact high pressure motor with short installation length;
Size 45 … 107,
Nominal pressure up to 450 bar;
Maximum pressure up 500 bar;
The axial piston unit is designed to be used in open and closed circuits.
1) These values are valid at:
for the optimum viscosity range from vopt = 36 to 16 mm2/s
with hydraulic fluid based on mineral oils
2) Intermittent maximum speed: overspeed for unload and overhauling processest, t < 5 s and Δp < 150 bar
3) Restriction of input flow with counterbalance valve
4) Torque without radial force, with radial force see table "Permissible radial and axial forces of the drive shafts"
1) These values are valid at:
for the optimum viscosity range from vopt = 36 to 16 mm2/s
with hydraulic fluid based on mineral oils
2) Intermittent maximum speed: overspeed for unload and overhauling processest, t < 5 s and Δp < 150 bar
3) Torque without radial force, with radial force see table "Permissible radial and axial forces of the drive shafts"
Q: Are you trading company or manufacturer?
A: We are factory with more than 20 years experience.
Q: How long for delivery?
A: Generally it is 15-30days as we are customized service we confirm with customer when place order.
Q: What is the MOQ?
A: It depends on what you are buying. Normally, our minimum order is one 20' full container and LCL container (less than a
container load) can be acceptable.
Q: Can you customize my products?
A: Yes, we can customized products with your design drawings like DWG, DXF, DXW, IGES, STEP, PDF etc.
Q: What is your terms of payment?
A: 30% T/T in advance, balance before shipment, or as per discussion.
Q: What about your quality control?
A: * . Checking the raw material after they reach our factory-----Incoming quality control(IQC)
* . Checking the details before the production line operated
* . Have full inspection and routing inspection during mass production----In-process quality control(IPQC)
* . Checking the goods after they are finished----Final quality control(FQC)
* . Checking the goods after they are finished----Outgoing quality control(QC)
* . 100% inspection and delivery before shipment